Craftsman 917.28035 - Manual (Page 22)

3. ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS-Position hole
in arm over pin (B) on outside of tractor
chassis and secure with retainer spring.
4. Repeat on opposite side of tractor.
5. ATTACH REAR LIFT LINKS (C)-Lift rear
corner of mower and position slot in link
assembly over pin (D) on rear mower
bracket
and secure with washer and
retainer spring.
6. ATTACH FRONT LINK (E)-Work from
left side of tractor. Insert rod end of link
assembly
through front hole in tractor
front suspension bracket (F).
7. Insert end of link (E) into hole in front
mower bracket (H) and secure with
washer and retainer spring (J).
8. Hook end of clutch cable spring (0) into
hole in idler arm (R).
9. Push clutch cable housing guide (P) into
bracket.
10. Install belt onto engine pulley (M) and belt
keepers (G).
IMPORTANT: Check belt for proper routing
in all mower pulley grooves.
11. Raise attachment lift lever to highest
position.
12. If necessary, adjust gauge wheels before
operating mower as shown in the Opera-