Craftsman 580.752130 - Manual (Page 14)

2. Review use of spray tips.
3. Prepare detergent solution as required by job.
4. Make sure detergent shut-off valve on cleaning tank is in
“Off” position.
5. If using cleaning tank, pour detergent into cleaning tank.
NOTE: The cleaning tank holds one gallon.
6. Make sure black detergent spray tip is installed.
For Rinsing:
1. Engage trigger lock on spray gun.
2. If using cleaning tank, rotate detergent shut-off valve on
cleaning tank to “Off position.
3. Remove black spray tip from nozzle extension.
4. Select and install desired high pressure spray tip
following instructions How to Use Spray Tips.
9A. If using cleaning tank, rotate detergent shut-off valve on
cleaning tank to “On” position (A).
7. Start at top of area to be rinsed, working down with
same overlapping strokes as you used for cleaning.
Automatie Ciil Down Sptem fTlemal Relief}
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach temperatures above
125°F. The system engages to cool the pump by discharging
the warm water onto the ground.
14