Craftsman 172.74544 - Manual (Page 17)

ASSEMBLY & ADJUSTMENTS cont
ADJUSTING THE HEIGHT
(Fig. 7 and 7a)
The Trimmer’s Telescopic Shaft Comes
in the Collapsed Position
1. To raise the telescopic shaft, pull
(separate) both the top and bottom
collars apart (see Fig. 7), and pull
(raise) the bottom section of the shaft
up to the desired height. It will click
into any one of the notches on the
shaft, and lock into place.
2. Release both collars to lock the shaft
into place (see Fig. 7a).
3. To lower or collapse the shaft simply
pull the bottom collar down
and lower the shaft.
ff
/ /
if
.I I w
Release
m
1
j
collars..,.
' >' W to lock T
M
collars
apart T
to raise
/ i:. ^ tm
Fig. 7
H
Fig. 7a
ADJUSTING THE CUTTING ANGLE (Fig. 8)
Your trimmer has a 4-position tilting head that easily adjusts to the desired working angle
for optimum operator control and comfort. To adjust the trimmer head angle:
1. Disconnect the trimmer from the power supply.
/t\ WARNING: To avoid injury,
ALWAYS turn off and disconnect
the trimmer from the power outlet
BEFORE installing parts or
cleaning the trimmer or making
any adjustments.
2. Press the red trimmer head
adjustment button on the
motor housing (see Fig. 8).
3. Move the trimmer head to
one of four different angles
and release the button.
Head will click into position.
Easily readjust the angle
to a more comfortable
or efficient position
as needed.
A WARNING: BEFORE connecting your trimmer to the power outlet,
BE SURE you are not pressing in on the trigger switch. Failure to do so could
result in accidental start-up, which may cause serious personal injury.
16