Craftsman 944.602951 User Manual
Crhrtsmrif
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OWNER’S
MANUAL
MODEL NO.
944.602951
Caution:
Read and follow
all Safety Rules
and Instructions
Before Operating
This Equipment
CRHrTSMRIf
18.0 HP
ELECTRIC START
42" MOWER
AUTOMATIC
LAWN TRACTOR
• Assembly
• Operation
• Customer Responsibilities
• Service and Adjustments
• Repair Parts
Sears Canada, Inc., Toronto, Ontario MSB 2B8
Table of contents
Document Outline
- TABLE OF CONTENTS
- WARRANTY
- LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN TRACTOR (RIDING EQUIPMENT)
- FULL ONE (1) YEAR WARRANTY ON BATTERY
- Steering Wheel
- Seat
- Battery
- Keys
- Slope Sheet
- TOOLS REQUIRED FOR ASSEMBLY
- TO REMOVE TRACTOR FROM CARTON
- BEFORE REMOVING TRACTOR FROM SKID
- HOW TO SET UP YOUR TRACTOR
- CONNECT BATTERY (See Figs. 2 and 3)
- NSTALL SEAT (See Fig. 4}
- TO ROLL TRACTOR OFF SKID (See Operation section page 10 for location and function of controls)
- TO DRIVE TRACTOR OFF SKID (See Operation section page 10 for location and function of controls)
- INSTALL MULCHER PLATE (If previously removed) (See Fig. 5)
- TO CONVERT TO BAGGING OR DISCHARGING
- CHECK TIRE PRESSURE
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL BELTS
- CHECK BRAKE SYSTEM
- i—a
- KNOW YOUR TRACTOR
- HOW TO USE YOUR TRACTOR
- TO SET PARKING BRAKE (See Fig. 7)
- STOPPINGSTOPPING (See Fig. 7)
- TO USE THROTTLE CONTROL (See Fig. 7)
- TO MOVE FORWARD AND BACKWARD (See Fig. 7)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 7)
- TO ADJUST GAUGE WHEELS (See Rg. S)
- TO OPERATE ON HILLS
- TO OPERATE MOWER (See Fig. 9)
- TO TRANSPORT (See Figs. 6 and 10)
- TOWING CARTS AND OTHER ATTACHMENTS
- BEFORE STARTING THE ENGINE
- MOWING TIPS
- GENERAL RECOMMENDATIONS
- ENGINE
- TRACTOR
- TO REMOVE MOWER (See Fig. 19)
- TO INSTALL MOWER (See Fig. 19)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)
- TO ADJUST BRAKE (See Fig. 25)
- ro REPLACE MOTION DRIVE BELT (See Fig. 26)
- TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 27)
- TRANSMISSION REMOVAUREPLACEMENT
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN/CAMBER
- FRONT WHEEL CAMBER
- TO REMOVE WHEEL FOR REPAIRS (See Fig. 28)
- TO START ENGINE WITH A WEAK BATTERY (See Fig. 29)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 30)
- ENGINE
- STORAGE