Craftsman 123.24201 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Figure 1 0 - 2 : Lug nut sequence of tightening
Tighten the lug nuts to the proper torque for tiie axle size on your iraiier, to prevent
wheels from coming loose. Use a torque wrench to tighten the fasteners If you do
not have a torque wrench, tighten the fasteners with a iug wrench as much as you
can^ then have a service garage or dealer tighten the lug nuts to the proper torque,
Over-tightenirig will result in breaking the studs or permanently defomiing the
mounting stud holes in the wheels. Do not exceed 120 ft,/lb
10.2.10 Suspension
All suspension components should be visually inspected at least every 6000
miles or 6 months, Check for loose fasteners and tighten to proper torque values.
Excesively worn or damaged parts should be replaced with original parts,
SO