Craftsman 123.24201 - Manual (Page 45)

Inspection and Service each 6 Months or 6,000 Miles
Snspension Inspect for bending loose faS“
tetters, wear Section 10 2 it!
Inspection and Service Each Year or 12,000 Miles
Item InspcciiBti/Service Mtmua! Sttlion
RcfercncE
Slruciure
• Frame members
• Wdds
• Slit!c-t)in
htspeci all fratsm members, bolls
& rit'eis Repair or replace ditm-
aged, wum or broken pans
itispeei alt weWs Repair as
needed
Clean dirt build-tip I ubricaie
slides, shafts ami iiears
Section 10 2 2
SettiDW 10 2 2 1
Section (0 2 22
Structure
• Axle Attaclimenl Bolls
CliCflk WITH DEALER Section 10 2 !
10.2 Inspection and Service Instructions
H).2J Axle Bolls, Frame, Suspension, & Structure
A
WARNING
A
Worn or broken suspension pans can cause loss of comrol and
property damage, serious injuty and death may result. Have
trader professionally inspected annually and after any impact
iTo perform many of the inspection and maintenance activities, you must jack up the
I trailer.
When jacking and using jack stands, place them so as to clear wiring and suspension
parts (springs, torsion bars, etc.) Place jacks and Jack stands itisids of die perimeter
strip on the supporting structure to which the axles are attached.
WARNING
A
Never crawl iinderyourtrailer unless it is on firm and level ground
and resting on properly placed and secured jack stands
Never attempt to change the tire while trailer is in folded
position Trailer can tip over
Failure to heed these warnings could result in property damage,
serious injury and death.
A WARNING
Do not use the Assist Wheel to support the Trailer while
changing your tires, Frailer could tip over causing serious injury
or death. .
■ . . _ ........■ ■ . ' '
45