A caution, Safety symbols – Craftsman 320.17541 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols, and the explanations with them, deserve your careful
attention and understanding. The symbol warnings
DO NOT
by themselves
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident prevention measures.
/t\ WARNING:
BE SURE to read and understand all safety instructions in
this manual, including all safety alert symbols such as “DANGER”, “WARNING”
and “CAUTION”, BEFORE using this router. Failure to follow all instructions
fisted below may result in electric shock, fire and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates DANGER, WARNING, OR
CAUTION. May be used in conjunction with other symbols or pictographs.
Failure to obey this safety warning WILL result in death or
serious injury to yourself or to others. Always follow the
safety precautions to reduce the risk of fire, electric shock
and personal injury.
A
warning
Failure to obey this safety warning CAN result In death or
serious injury to yourself or to others. Always follow the
w -m
Jr
Jr
safety precautions to reduce the risk of fire, electric shock
and personal injury.
A CAUTION
Failure to obey this safety warning MAY result in personal
injury to yourself or others or property damage. Always
follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of
important Information and/or instructions
that could lead to
equipment or other property damage if not followed. Each message is preceded by the
word “NOTE:" as in the example below:
NOTE: Equipment and/or property damage may result if these instructions
are not followed.
AWARNING: The operation of any router can result in
foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power
tool operation, ALWAYS wear safety goggles or safety
glasses with side shield and a full-face shield when
needed. We recommend a Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with
side shield, available at Sears Stores or other Craftsman
Outlets.