Unpacking, Safety instructions cont – Craftsman 320.17541 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SAFETY INSTRUCTIONS cont.

ADDITIONAL RULES FOR SAFE OPERATION coni

7, ALWAYS check the tool for damaged parts.

Before further use of the tool, a guard or

other part that is damaged should be carefully checked to determine if it will operate
properly and perform its intended function. Check for misalignment or binding of
moving parts, breakage of parts, and any other condition that may affect the tool's
operation. A guard or other part that is damaged should be properly repaired or replaced

at a Sears Service Center.

remove all nails from lumber before routing.

9. SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to Instruct

others who may use this tool. If someone borrows this tool, make sure they have
these instructions also.

UNPACKING

/K WARNING:

Your router should NEVER be connected to the power source

when you are assembling parts, making adjustments, installing or removing
collets / nuts, cutter bits, cleaning or when it is not In use. Disconnecting the

router will prevent accidental starting, which could cause serious personal
injury.

_______________ _________

When unpacking the box don’t discard any packing materiais until all of the contents are

accounted for:

1. Carefully lift the

Router Motor and Fixed Base

with the

1/2-in. collet/nut

already

installed, out of the carton and place on a stable flat surface.

2. Open the parts bag to locate the following:

«Sawdust Extraction Hood

and

2 Screws

used to attach hood to base

• 1/4-in. Collet/Nut

• Collet/Nut wrench

3. Inspect the items carefully to make sure that no breakage or damage has occurred

during shipping. If any of the items mentioned are missing, (refer to “PARTS LIST’

illustration on page 11), return the router to your nearest Sears store or Craftsman
outlet to have the router replaced.

/K WARNING:

If any parts are broken or missing, DO NOT attempt to plug

in the power cord or operate router until the broken or missing parts are
replaced. Failure to do so could result in possible serious injury.