Craftsman 320.17541 - Manual (Page 14)

DESCRIPTION cont.
PRODUCT SPECIFICATIONS "
Rating 9,5 Amps
No-load Speed 25,000 RPM
Peak HP
13/4
Input 120-volts, 60Hz AC
Collets/Nuts and Cutter Sit Shank Diameters 1/4-in. 1/2-in.
Fixed Base Diameter 6-inches
Sub Base Opening (Diameter for cutter bit use) 1 V4-inches
Sub Base Thickness 0.23-inches (6mm)
Fixed Base Depth of Cut 1
3
/
4
-inches (45mm)
ASSEMBLY
NOTE: This tool is shipped completely assembled.To install or remove bits
or add accessories such as sawdust ejection hoods for hook-up to vacs, see
the following instructions.
SELECTING THE CUTTER BIT
This router comes with 1/4-in, and 1/2-in. coiiets/nuts that accept 1/4 and 1/2-inch
diameter shanked cutter bits.
A
WARNING: Do not use router cutter bits that have a cutler bit diameter
larger than 1 V4-inches as they will not fit through the sub-base opening, and
wlli cause damage to the sub-base, the motor, and could cause serious personal
injury to the operator.
NOTE: The sub-base installed on this router has an opening of lV4-inches.
To use cutting bits with a larger diameter, use a sub-base with a larger opening,
sold separately at Sears stores or other Craftsman outlets.
A WARNING: ALWAYS turn motor off and unplug router before making any
adjustments or installing accessories. Failure to unplug the router could result
in accidental starting which can cause serious persona! injury.
14