Carrier Access KTA - Manual (Page 8)

Instruction: Depending on your service provider the KTA may display “gk zone” instead of
“service address”.
Notice: If login failed, contact your service carrier to adjust parameters. Do not ajust default value in most
cases.
¾ Audio Settings
Audio codec
otice: All above audio parameters are default settings. Contact your operator to adjust the corresponding
Ringtype
Voice active auto gain auto echo
detection control cancellatio
N
parameters if any problems.Please do not adjust these without the advice of your service provider.
Other Settings
¾
IP address of network
time server adjust the login passport
1234 is default value
Use Digitmap: Please leave this function turned on. The Digit map enables the KTA to recognize dialing
sequences from around the world. If the user dials a recognized dialing sequence then the KTA initiates the call
without the user having to press the # key after dialing.
Notice: Enter #358# to restore factory(default value) if forget KTA login password. Pasword will restore to
the default value, 1234.
8