Carrier Access KTA - Manual (Page 6)

After network connection, please pick up handset, press key “#*047#” to hear IP address of the
adaptor box. In the address field of browser, type the IP address and press ENTER to display the
Settings page. A log-in page will be shown. Enter log-in password to set parameters. The default
password is 1234.
If adaptor box cannot get IP, enter “##3427# to cancel DHCP mode. After reset and beep sound
heard, please pick up the handset, enter “#73847#xxx*xxx*xxx*xxx#” to set IP address of adaptor
box. Get the IP address and use browser to set up.
¾ Network Settings
Depending on the requirement of your ISP or Network you can configure the KTA with a Static IP,
DHCP, or PPPoE:
Static IP: If your ISP / Network requires the use of a Static IP then you will be required to
complete all of the parameters listed below:
6
Fill in IP Fill in subnet mask Fill in default
gateway ip