History commands – Cisco 1503 User Manual
Page 19
Using Your Hub Software 3-19
User Interface Commands
History Commands
Use these commands in this section to configure how the hub stores and displays command
input history.
show history
terminal history
terminal no history
Syntax:
show history
Mode:
Guest
Description:
Displays the commands that are stored in the history buffer.
Syntax:
terminal history
Mode:
Guest
Description:
Enables the terminal history feature, which configures the hub to retain
commands in working memory. The number of commands retained is
configured with the terminal history size command. The commands are not
saved after the hub is rebooted with the restart command.
Syntax:
terminal no history
Mode:
Guest
Description:
Disables the terminal history feature (the hub retains past commands in
memory).