Sony KV-32XBR48 - Manual (Page 4)

Connecting and Installing the TV
Note on AC Power Cord
The AC power cord is attached to the rear of
the TV with hooks. Do not attempt to remove
the cord from these hooks. Doing so could ~
cause damage to the TV.
Do not remove
the cord from
these hooks.
AC Power cord
Connector Types
You may find it necessary to use some of the
following connector types during set up.
Coaxial cable
Standard TV cable and antenna connector
Plug Type
cl ^ —*■ G® Press onto connection
Screw-on Type
S Video cable
High quality video connector for enhanced
picture quality
^^ ^ press onto connection
AudioA/ideo cable
Conventional Audio/Video cable
(HD Press onto connection
Audio (Left) - White
Audio (Right) - Red
Video - Yellow
(Some DVD Players are equipped with the
following three video connectors.)
Y - Green
B-Y (Cb) - Blue
R-Y (Cr) - Red
S-LInk/CONTROL S cable
Sony connector for S-Link and CONTROL S
connections. These features are exclusive to
Sony products, and allow greater control of all
Sony equipment.
Screw onto connection
® Press onto connection
Note:
• For S-Link and CONTROL S connections,
you can use the combined S-Link/
CONTROL S cable provided with some
Sony video equipment, or you can purchase
a separate S-Link/CONTROL S cable (RK-
G69HG).
Making Connections
For the best picture quality, a cable TV system
or outdoor antenna is recommended.
Connecting directly to cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will
be equipped with standard coaxial cable (see
A); older homes will probably have 300-ohm
twin lead cable (see B); still other homes may
contain both (see C).
B
VHP only
or
VHF/UHF
or
Cable
VHF only
or
UHF only
or
VHF/UHF
75-ohm
coaxial cable (Rear of TV)
VHF/UHF
300-ohm twin
lead cable (Rear of TV)
VHF/UHF
VHF
and
UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable