Sony KV-32XBR48 - Manual (Page 18)

Using your New TV (continued)
Watching the TV
Many TV features can be accessed directly
through the remote control. The following
chart will explain the function of some
buttons found on your remote control.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the White l^beied Buttons for TV Operations.
TV (FUNCTION) Activates the remote control for use with the TV.
TV POWER Turns the TV on and off. If a video input indication (e.g., VIDEO 1, VIDEO 2)
appears on the screen, press TV/VIDEO until a channel number appears.
®-(D
and ENTER
Use for direct channel selection. Press 0-9 to select a channel (tor example,
to select channel 10, press 1 and 0), the channel will change after 2 seconds,
or you can press ENTER for immediate selection.
CH +/- Press to scan through the channels (-r up or - down).
VOL +/- Press to adjust the volume { + up or - down).
JUMP Press to alternate or jump back and forth between two channels. The TV will jump
between the current channel and the last channel selected using the 0-9 buttons.
MUTING Press to mute the sound (“MUTING" will appear on the screen). Press again
or press VOL + to restore sound.
FREEZE
(yellow labeled
button)
Press to freeze the picture.
Press again or press ( off ) to cancel.
16