Connecting a dvd player (upper illustration), Notes – Sony KV-32XBR48 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a DVD Player (Upper
illustration)
Using AUDIO/VIDEO connectors, connect
VIDEO 1 IN on your TV to LINE OUT on
your DVD Player.
Connecting a DVD Player with
component video output
connectors (Lower illustration)
1
Using AUDIO connectors, connect AUDIO
R and L of the LINE OUT on your DVD
Player to AUDIO R and L on the VIDEO IN
4 panel at the rear of your TV.
2
Using three VIDEO connectors, connect Y,
B-Y, and R-Y on the COMPONENT
VIDEO OUT on your DVD Player to Y, B-
Y, and R-Y on the VIDEO IN 4 panel at
the rear of your TV.
Notes:
• Some DVD Player terminals may be
labeled Y, Cb, and Cr. If so, connect Y
(green) to Y, B-Y (blue) to Cb, and R-Y
(red) to Cr.
• Because the high quality pictures on a
DVD disc contain a lot of information,
picture noise may appear. In this case,
adjust the SHARPNESS in the VIDEO
menu, (see SHARPNESS on page 23)
Disconnect all power sources before making any connections.
(Rear of TV)