Sony KV-32XBR48 - Manual (Page 26)

Adjusting your SET UP (menus) (continued)
J'
Using the AUDIO Menu
Ea
BALANCE
EFFECT OFF
MTS:
STEREO
SPEAKER ON
AUDIO OUT : VARIABLE
DMENU
Use 01 Si Exit
Sliders
For detailed information on using the remote
control to modify menu settings, refer to
"'Learning Menu Selection" on page 22.
To select the AUDIO J' menu:
Display Highlight J* Select
To restore the factory settings
Press RESET on the remote control while the
AUDIO menu is selected.
Tip --Q-
Press (J) for direct selection of an EFFECT setting.
24
TREBLE
Sound Adjustment
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
BASS
Sound Adjustment
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
BALANCE
Sound Adjustment
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
EFFECT
Customize sound
effect based on the
program's audio
type.
AUTO SRS: Automatically detects signal type and switches the TV effect between
SRS and SIMULATED.
SRS: Produces a dynamic three dimensional sound for stereo signals.
SIMULATED: Adds a surround-like effect to mono programs.
OFF: Normal stereo or mono reception.
MTS
Enjoy stereo,
bilingual and mono
programs.
STEREO: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
MONO: Select for mono reception, (use to reduce noise during stereo broadcasts)
Quick MTS access: Press MTS on your remote control to cycle through the MTS
options as follows: (STEREO ♦ SAP ♦ MONO ♦ STEREO)
SPEAKER
Custom selection of
audio output source.
ON: Select to listen to the sound from the TV speakers alone or the TV speakers
and a separate stereo system.
OFF: Select to turn off the TV speakers and listen to the TV's sound only through
external audio system speakers.
AUDIO OUT
Easy control of
volume adjustments.
AUDIO OUT can only be set when speakers are set to OFF.
VARIABLE: Sound output varies according to the TV settings. VOLUME, BASS,
TREBLE, and BALANCE are adjusted through the TV. Useful when you want to
use your remote control to control the output ot a separate audio system.
FIXED: Sound output is held at a fixed level. VOLUME, BASS, TREBLE, and
BALANCE are fixed to the factory settings. VOLUME adjustments are made
through your stereo.