Setting the clock, Setting the date, Setting the clock and the date – Sony ICF-C390 User Manual
Page 6: Playing the radio
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Clock
and the Date
Setting the Clock
1
Plug in the unit.
The display will flash "AM 12:00".
2
While holding down
CLOCK,
press
either + or - under
TIME SET
till the
correct tinae appears in the display.
When you release
CLOCK,
the clock
begins to operate.
• To set the current time rapidly, keep pressing
the + or - button while holding down CLOCK.
Setting the Date
1
While holding down
SNOOZE/DATE/
SLEEP OFF,
press either + or - under
TIME SET
till the correct date appears in
the display. Then, release
SNOOZE/
DATE/SLEEP OFF.
• To display the date, press SNOOZE/DATE/SLEEP
OFF. The display returns to the current time
when you release SNOOZE/DATE/SLEEP OFF.
When SNOOZE/DATE/SLEEP OFF is pressed
while the SNOOZE function is operating, the
year and date will not appear in the display.
Playing the Radio
1
Press
RADIO ON/SLEEP
to turn on the
radio and adjust
VOL
(volume).
2
Select
FM
or
AM
and tune in a station
using the
TUNING
dial.
• To turn off the radio, press RADIO OFF/ALARM
RESET/OFF.
• To improve radio reception
FM: Extend the FM wire antenna fully to
improve FM reception.
AM: Rotate the unit horizontally for optimum
reception. A ferrite bar antenna is built into
the unit.