To stop the timer recording, I to set the timer while the tape is running, To check the setting – Sony GV-9 User Manual

Page 41: If you have made a mistake in timer setting, If the turn-on and turn-off times are the same

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Be sure to press the TIMER REC ON/OFF button only after you have finished the

timer settings. If you press it while presetting, the power turns off at this point and
the preset program is erased.

During timer recording,

both picture and sound will be muted. To listen to the sound

and watch the picture, press LCD ON/OFF.
When the TIMER REC lamp is lit, any buttons except for the TIMER REC ON/OFF
button and the TIMER SET/CFIECK button do not function.

Note_______________________________________________________________

To stop the timer recording

Press TIMER REC ON/OFF again.

If a power interruption occurs when the unit is connected to the AC power
source

Recording will stop. The power will not be turned on even when the interruption
ends.

To set the timer while the tape is running

You can set the timer during playback or recording.

In this case, advance or rewind the tape to the desired position before pressing the

TIMER REC ON/OFF button in step 6.

To check the setting

Press TIMER SET/CHECK while the

TIMER REC lamp is lit.
The power is turned on and the turn-on

and turn-off times will be displayed.

OH TIHE
Pn 8 30

Pn 7 00

OFF TIME

PM 9 d5

__ )

If you have made a mistake in timer setting

Press TIMER REC ON/OFF to cancel the timer recording, then turn the unit on and
set the timer again.

If the turn-on and turn-off times are the same

You can record to the end of the tape.

If the tape ends before the turn-off time, recording will stop and the power will be
turned off.