Sony GV-9 - Manual (Page 23)

5 Select the desired channel.
A vertical line (VHF: green,
UHF: red) appears and moves
while the unit is searching for
the channel and stops when
the channel is tuned in.
The vertical line
disappears after
several seconds.
Press + for higher-numbered channels and - for lower-numbered channels.
The channels will appear in numerical sequence. Press CHANNEL +1-
repeatedly until you get the desired channel on the screen.
0
Adjust the antenna for the best reception.
Pull out the base
of the antenna
Y Adjust the volume.
w
To increase
volume.
To decrease
volume.
To turn off the TV
“• tower —»- Slide POWER to the right and
release. The lamp goes off.
23