Sony SLV-N88 - Manual (Page 7)

step 2 : Setting up the remote commander
Inserting the batteries
Insert two size AA (R 6 ) batteries
by matching the + and - on the
batteries to the diagram inside the
battery compartment.
Insert the negative (-) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote
commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with a
dot (•) can be used to operate your
Sony TV.
If the TV does not have the @
symbol near the remote sensor, this
remote commander will not
operate the TV.
Remote sensor
/___________ _______________ \
Bie>a
1 5 5 o
TV/VIDEO
o
’ cdcd ' cz :»
'CDCDO
'O '© '©
■0 0 '0
To operate Set *TV / VIDEO to
the VCR VTDKO and point at the remote sensor at the VCR
a Sony TV •TV and point at the remote sensor at the TV
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
continued
Setting up the remote commander 7