57 changing menu options, Changing menu options – Sony SLV-N88 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing menu options
1
Press MENU.
Press Mm to move the cursor (►) to “Advanced
options,” then press OK.
► Tape select:
[T120]
Auto play:
[ON]
Auto repeat:
[OFF ]
Auto power off:
[OFF ]
Power save:
[OFF ]
Select : vv
Set : Bb
End : OK
Quit : MENU
2 Press Mm to move the cursor (►) to the option to change.
^ Press
C Press MENU to exit the menu.
Menu choices
Initial settings are indicated in hold print.
Menu option
Set this option to
Tape select
•
T-120
when using a T-120 or shorter length tape.
• T-160 when using aT-160 length tape.
• T-180 when using a T-180 or longer length tape.
Auto play
•
ON
to start playback automatically, when you insert a tape
with its safety tab removed.
• OFF to turn off Auto play. You need to press PLAY to
start playback, even if you insert a tape with its safety tab
removed.
Auto repeat
• ON to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
•
OFF
to turn off Auto repeat.
Auto power off
• 1Hr to turn off the VCR automatically one hour after the last
operation.
• 2Hr to turn off the VCR automatically two hours after the last
operation.
•
OFF
to set no specific time to turn off.
Power save
• ON to turn off the indicators in the display window during
standby mode to reduce the VCR’s power consumption to a
minimum.
•
OFF
to turn on the indicators in the display window while the
VCR is standing by.
>
a
a
5'
3
w
O
■o
(D
O
3
(/)
Changing menu options 57