Sony CDX-C880 - Manual (Page 18)

m
Changing the sound and
display settings
> ou Clin set:
• Clock (piigc
• D.Into (nu.il Inloiiii.itum) - to displnx' the
clock iind the pl.t\ mode at the same time
(ON) or to display the information
alternately (Cll-T).
• Atnber/Creen ' to elianpe the illuminatii'n
color to atnber or green.
• Dimmer to - change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the lights on.
— Select "on" to dim the display.
• Contrast to acfjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
• Voice guide function for vocalized
comments.
— Select "Voice 1" to turn the voice guide to
minimum volume.
— Select "Voice 2" to turn the voice guide to
middle volume.
— Select "Voice 3" to turn the voice guide to
maximum volume,
— Select "Voice off" to cancel the voice
guide function.
• Beep to turn on or off the beeps.
• RM (Rotary Commander) - to change the
operative direction of the controls of the
rotary commander.
— Select "norm" to use the rotary
commander as the factory-set position.
— Select "rev" when you mount the rotary
commander on the right side of the
steering column.
• BBE to - enjoy bass and treble even at low
volume. The bass and treble will be
reinforced.
— Select "BBE 1" to reinforce the bass and
treble.
— Select "BBE 2" to reinforce the bass and
treble more effective than "BBE 1."
— Select "BBE off" to deactivate BBE.
• DF (Digital Filter) - to select the type of filter
you want, you can adjust the sound to much
your unit, your speaker, the music source,
etc.
— The digital filter appear its presetted
when you select "normal."
— The pre-ringing and post-ringing will be
minimize when you select "slow."
• LPF (Low Pass Filter).
• A.Scrl (Auto Scroll) (page 9, 19).
1
Press
('SHIFT).
/ Press (SET UP) repeatedly until ti ■
desired item appears.
I .\vU Ume wHi press v 3 ' (SE i I I’), iUv
v h.lilies as toliows;
Clock ♦ O.Info*' -► Amber/Green —* Dimi
♦ Contrast ♦ Voice*' —• Beep RM —• i
. DF*' — LPF*' A.Scrl*'
•' When you have not tune the station or
IS no CD/MD being played, these items i
nof appear.
•- DF does not work when the disc playba-
optional CD/MD changer.
Notes
• The displayed item will differ depending on
source.
• If an optional digital preamplifier is conneef-
the unit, BBE and Voice guide function does
works.
3
Press
()D (—►)
to select the desired
setting (for example: on or off).
For the "Contrast" setting, pressing
(—►) makes the contrast higher, and
-- ,
pre.ssing d} («—) makes the contrast lo'
4
Press fSHIFT).
After the mode setting is complete, the
display goes back to normal playback
mode.
Adjusting the frequency
of the subwoofer(s)
To match the characteristics of the connecte
subwoofer(s), you can cut out the unwanter
high and middle frequency signals entering
the subwoofer(s). By setting the cut-off
frequency, the subwoofer(s) will output on
low frequency signals so you can get a clear
sound image.
1
Press ( source ) to select a source (rad
CD or MD).
2
Press (SHIFT), then press (j3) (SET UP)
repeatedly until "LPF" appears.
3
Press CD (—*) ot CD (-^) repeatedly tc
select desired setting.
Each time you press (T) (—►) or (D) (■<—),
the cut-off frequency in the display chanj
as follows:
LPF off LPF 80 Hz • • LPF 120 Hz
18
4
Press (SHIFT).
When the frequency setting is complete, t
display goes back to the normal playback
mode.