Auto-immobilization feature, Auto-immobilization sequence – CLIFFORD 770 User Manual
Page 35

32
PIN Code Confirmation Procedure
Begin this procedure within 15 seconds of finishing the programming
sequence or the new code will not be set.
1.
Turn on the ignition.
2.
Enter the new PIN code.
3.
Press and hold
for three seconds.
z
LED turns on: New PIN code is learned and program-
ming is complete.
z
LED stays off: New PIN code is not learned and the sys-
tem reverts to the old PIN code. Redo the programming
sequence.
auto-immobilization feature
Auto-immobilization is a feature designed for maximum security; it
activates the UltraSecure Immobilization circuitry automatically.
auto-immobilization sequence
1.
Turn ignition off or disarm alarm.
2.
After 30 seconds the systems Immobilization circuits activate
and engage the starter and ignition interrupt.
3.
LED blinks at ½ normal speed.
- RSIII (53 pages)
- Model RSX1.5 (38 pages)
- Arrow II (12 pages)
- Model RSX1.2 (39 pages)
- SuperNova II (20 pages)
- 50 (23 pages)
- cx-427 (18 pages)
- Concept 100 (10 pages)
- XL4000 (25 pages)
- AVANT GUARD 4 (15 pages)
- Arrow 5.1 (38 pages)
- 500 (18 pages)
- BlackJax 4 (8 pages)
- III (16 pages)
- Sabre (7 pages)
- Concept 40 (25 pages)
- Sabre II (16 pages)
- AvantGuard 5.1 (53 pages)
- AvantGuard III (36 pages)
- concept 30 (21 pages)
- ACE 7500 (12 pages)
- Bullet 4 (12 pages)
- 22CX (25 pages)
- 700-IQ (25 pages)
- 800-IQ (25 pages)
- AUTO SECURITY (12 pages)
- 330X1 (19 pages)
- 12.5X (61 pages)
- Remote Start & Security System 520.4X (53 pages)
- IntelliPage System Car Alarm (41 pages)
- 800 (23 pages)
- concept 20 (25 pages)
- 700 (23 pages)
- 900-IQ (25 pages)
- RSX3.2 (52 pages)
- G5 System Series (10 pages)
- 590.4X (69 pages)
- 100 (8 pages)
- Tazor II (8 pages)
- XL2000 (12 pages)
- CYBER 2 (9 pages)
- Model RSX3.5 (57 pages)
- G5 11CX 562C (20 pages)
- Auto Security SuperNova (15 pages)