CLIFFORD 770 - Manual (Page 33)

30
remote start
z This feature is only available with IntelliStart connected.
z The remote channel programmed into this feature will acti-
vate or shut down the Intellistart remote start system.
window control
z This feature is only available with SmartWindows connected.
z The remote channel programmed into this feature will activate
the vent or roll down feature of the SmartWindows system.
accessory c output
The remote channel programmed into this feature will activate the
accessory output.
clear all remotes
z This feature will erase all remote codes from the system
memory. This feature is convenient for erasing any remotes
that have been lost, stolen, or incorrectly programmed into
the system.
z After entering this feature press any button on the remote;
the siren will chirp to indicate that all remotes have been
erased from memory.