User selectable features descriptions - column two – CLIFFORD 770 User Manual
Page 30
27
© 2 0 0 6 d i re c t e d e l e c t ro n i c s
user selectable features descriptions - column two
set pin code
This feature allows the setting of the user's personal PIN code. For more
information, please refer to the PIN Programming section of this guide.
select siren sounds
The individual sounds the siren produces during an full trigger alarm can
be customized for owner recognition of an alarm trigger. For more infor-
mation, please refer to the Select Siren Sounds section of this guide.
fact II off/on
z
Off: The alarm will respond to zones 1, 2, 3, and 8 inputs
indefinitely without bypassing.
z
On: The alarm will bypass for 60 minutes if zones 1, 2, 3,
and 8 are triggered three times within a one hour period.
remote valet
®
off/on
z
Off: The alarm can not be put into Valet
®
mode with the
remote control.
z
On: The alarm can be put into Valet
®
mode with the
remote control.
entry delay off/on
z
Off: There is no entry delay when armed. The system will
trigger instantly when a door is opened.
z
On: If the system has passively armed, it will not trigger for 15
seconds after a door is opened allowing the user to enter the
vehicle and disarm the system via the PlainView 2 Valet
®
button.