CLIFFORD 770 - Manual (Page 21)

18
table of zones
The zone number is the number of LED flashes used by the system to
identify a specific input. The standard input assignments are listed
below, along with spaces to write in any optional sensors or switches
you have had installed. If the Warning Zone response is triggered, the
LED will not report it.
anti-code grabbing (ACG)
This unit features Anti-Code Grabbing (ACG) with Random Code
Encryption. This means the receiver and remotes each use a mathemati-
cal formula called an algorithm to change their code each time the
remote is used. This technology has been developed to increase the secu-
rity of the unit. The control unit knows what the next codes should be.
Zone - Number Dealer-Installed
of LED Flashes Description Options
1 Proximity sensor
2 Omnisensor
3 Mux 1 trigger - for optional Blue
sensors
4 Door switch trigger
5 Instant trigger - trunk
6 Instant trigger - hood
7 Ignition trigger
8 Mux 2 trigger - for optional Orange
sensors
9 BlackJax activation
10 Power interrupt