Sony GDM-2000TC - Manual (Page 12)

Power saving function
rhis monitor is capable of 2 states of reduced power
consumption.
By sensing the absence of one or both sync signals coming
from the host computer, it will reduce power consumption
as follows.
State Power consumption
Required
resumption time
(!) Power
indicator
POWER SAVIG
indicator
1 Normal operation 1007< — green on off
2
Suspend
(1st step of power saving)
approx. 10% approx. 3 sec. green on orange on
3
Active-off
(2nd step of power saving)
approx. l ° ! o approx. 10 sec. off orange on
Power Saving Operation
• If one of the H-sync or V-sync signals is absent, the unit
enters the Suspend state.
• If both the H-Sync and V-Sync signals are absent, the unit
enters the Active-off state.
CAUTION: The Power Saving function will automatically
put the monitor into the Active-off state if the
power switch is turned on without any video
signal input. Once the horizontal and vertical
syncs are sensed, the monitor will automatically
return to its Normal operation state.
Specifications
Picture tube
Resolution
Effective picture size
Display picture size
Deflection frequency
0.31 mm phosphor trio pitch
20 inches measured diagonally
(19" visual)
90-degree deflection
Horizontal: Max. 1280 dots
Vertical; Max. 1024 lines
Approx. 388 X 292 mm (w/h)
(15 i:: 11 V j inches)
Approx. 350 X 280 mm (w/h)
(13 ’/ k X 11 '/s inches)
or
360 X 270 mm (w/h)
(14 '/j X 10 Vi inches)
Horizontal: 31.5 to 85 kHz
Vertical; 50 to 150 Hz
Color temperature
Input
3000 K - 9300 K (1 step 100 K)
R/G/B: 7 5 Q BNC
0.714 Vp-p, Positive
Sync on Green: 0.286 Vp-p, Negative
External sync: 1-5 Vp-p, Negative or
Positive
HD/VD or Composite sync: 2 kii/
75D BNC
AC input voltage/current
100 to 120 V, 50/60 Hz, 3.0 A
220 to 240 V, 50 - 60 Hz, 1 . 8 A
474 X 513 X 529 mm (w/h/1)
(length including the control stand)
(18 Vi X 20 ' / 4 X 20 ^/» inches)
Approx. 33 kg (72 lb 12 oz)
TC WARE for Mac: GDM-CWlOO
(Device Profile/Display control
software)
Dimensions
Mass
Optional accessory
Design and specifications are subject to change without
notice.
Use of the tilt-swivel
With the tilt-swivel, this unit can be adjusted to be viewed
at your desired angle within 90° horizontally and 20°
vertically.
To turn the unit vertically and horizontally, hold it at its
bottom with both hands as illustrated below.
12