Sony CFD-S23 - Manual (Page 9)

00 o
o
<
2
a
o
\
o
5/5
00
O
h.
O
CO
o
2
to
h-
o>
\
o
\ 14
o
Playing tracks
repeatedly
(Repeat Play)
You can play tracks repeatedly in
normal, shuffle or program play modes
(see page 15).
PLAY MODE/ №«/►►(
M0(l0/ST/ISS
Tipi
CFD-S33a»iy:
» To enjoy a short repeat
play, vise LOOP on the
remote.
As soon as you press
and hold LOOP during
play, the player starts a
loop play of die part
between the point
where you pressed
LOOP and a point
about a second behind.
When you release
LOOP, the player
returns to normal play.
• On the remote, use
MODE instead of
PLAYMODB/MONO/
ST/ISS.
The CD Player
1
2
Press ■..
"Gl" appears in the display
repeat mode you wanl appears In the display.
To repeat Select
a single tiack RIPl
all the backs | RiPALL
backs in random order SHUF REP
pTogramd tracks |
I
PGM REP and then ptogam
trtcks (see step 3 on page
IS.
3
Do either of the fcdloving to start repeat play:
* When you've selected BEP1, select the track by
pressing 1« or ►>! and press Wl.
• When you've selected REP ALL, SHUF REP or
PGM REP, press Wl.
To cancel Repeat Play
Press PLAY MODE/MOMO/iT/BS until "REF'
disappears in the display.
Creating your
own program
(Program Play)
You can make a program of up to 20
tracks in the order you want them to be
played.
PUY MODE/
MONO/ST/ISS DISPLAY/
Tipi
• CFD-S33onhf:
To create your own
program on the remote,
proceed as follows:
1 Press ■.
2 Press MODE until
'TGM" appears in
the display.
3 Press the number
buttons for the tracks
you want to program
in the order you
want.
4 Press
• You can. play the same
program again, since
the program is saved
until you open the CD
compartment.
• You can record your
own program. After
you’ve created the
program, insert a blank
tape into the tape
compartment and press
0 to start recording.
1
2
3
Press
"Cd" appears in the display.
Press PLAY MODB/MONO/ST/ISS until 'TGM"
appears in the display.
Press /►>! and press DISPUY/ENT/MEM
for the tracks you want to program In the order
you want. You can program up to 20 tracks.
To cancel Program Play
Press PLAY MODE/MOMO/ST/ISS until "PGM"
disappears from the display.
To check the order of tracks before play
Press DISPLAY/ENT/MEM.
Every rime you press the button, the track number
appears in the programed order.
To change the current program
Press ■ once if the CD is stopped and twice If the CD
is playing. The current program will be erased. Then
create a new program following the programing
procedure.
The CO Player
"mmim