Hd open/close button, M display mode button, Wi rms play buttons – Sony DTC-57ES User Manual

Page 8: Repeat 1/all button, Skip play button, I cd operation buttons

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Location and Function of Controls

Front Panel/Remote Commander

OPEN/CLOSE button

Press to open or close the cassette compartment.

Tape operating buttons
■ (stop):

Press to stop recording or playback.

► (play);

Press to play back the tape.

•REC (recording):

Press toenter the record-pause mode.

After pressing this button, press the ll or ► button.

llPAUSE (pause):

Press to stop for a moment during

recording or playback. To restart recording or playback,
press this button again or press the

>■

button.

If the unit is left in the pause mode for about 10
minutes, it wiil automatically be released and the
deck will enter the stop mode. To restart recording

or playback from the stop mode, press the «REC or ►

button respectively.

OREC MUTE (record muting):

Inserts a sound-muted

portion (space).

(AMS):

Press to locate the beginning of the

selection during the playback.

(rewind/review, fast-forward/cue):

In the stop

mode, press to rewind/fast-forward the tape. During
playback, press to rewind or fast-fonward the tape while
listening to the sound.

m DISPLAY MODE button

Changes the display mode. (Refer to page 10.)

RMS play buttons

ENTER:

To program the selections in a desired order,

press this button after pressing the numeric buttons.

CHECK:

Press to check the programmed contents.

REPEAT 1/ALL button

Press to play a desired portion repeatedly. Each time you
press the button, the indicatior changes as follows;
REPEAT 1 -► REPEAT ALL -► off

SKIP PLAY button

Press to activate the skip ID code function. The portion of
the tape previously marked will be skipped.

CD operation buttons

Operative only for the Sony CD player equipped with a

Remote Commander.
II

(pause):

Press this button twice to start playback Press

this button once in the playback mode, the deck enters

the pause mode.

(AMS):

Press to locate the desired selection on

the Compact Disc during playback or in the stop mode.

CD SYNCHRO (CD synchronized recording) buttons

(The playback of the Sony CD player equipped with a
Remote Commander and the recording of the DAT deck
can be performed simultaneously.)

STANDBY:

Press to set the unit in the record-standby

mode.

START:

Press to start recording of the DAT deck and

then playback of the CD player.

STOP:

Press to stop the DAT deck recording and the CD

player playback.