Notes – Sony SLV-SE220G User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Example C

Your VCR (Recorder)

LINE-3*i or LINE-

2*2

^: Signal flow

How to connect to a stereo system (SLV-SE820G only)

Connect the t LINE-2 L o Rjacks on this VCR to the audio outputjacks
on the stereo system, using the RK-C510HG audio cable (not supplied).

Notes

• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other

VCR, select the input correctly to prevent a humming noise.

• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-

2106HG cable instead and connect the cable to the line outjacks ofthe other VCR.

• When you connect another VCR to the LINE-3*

or LINE-2*

connector, press

INPUT SELECT to display “L3”*

or “L2”*

in the display window.

SLV-SE820G only

SLV-SE720G/I and SE220G/I only

00 Connecting to a VCR or stereo system