To cancel the auto set up function, To change the rf channel, 20 step 4 : setting up the vcr with – Sony SLV-SE220G User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 4 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
funetion. With this funetion, you ean set the TV ehannels, guide ehannels for the
VIDEO Plus+ system, and VCR eloek automatieally.
^
Turn on your TV and set it to the video ehannel.
If your TV does not have a Seart (EURO-AV) eonneetor, tune the
t
V to ehannel 21 (the initial RF ehannel for this VCR). Refer to
your TV’s manual for TV tuning instruetions. If the pieture does not
appear elearly, see “To ehange the RF ehannel” on page 20.
2
Conneet the mains lead to the mains.
The VCR automatieally turns on, and the message for the Auto Set
Up funetion appears.
Press OK
The VCR starts searehing for all of
the reeeivable ehannels and presets
them in the appropriate order for
your loeal area.
A U T O S E T U P
P L E A S E W A I T
4 0 %
If you want to ehange the order of
the ehannels or disable unwanted
E X I T : M E N U
programme positions, see
After the seareh or download is eomplete, the eurrent time appears
for any stations that transmit a time signal. If the time does not
appear, set the eloek manually. See “Setting the eloek” on page 32.
To cancel the Auto Set Up function
Press MENU.
To change the RF channel
If the pieture does not appear elearly on the TV, ehange the RF ehannel on
the VCR and TV. Seleet INSTALLATION from the menu, then press
to highlight VCR OUTPUT CH and press ,. Seleet the RF ehannel by
pressing the M/m buttons. Then, tune the TV to the new RF ehannel so that
a elear pieture appears.
20 Setting up the VCR with the Auto Set Up function