Sony SLV-SE220G User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
’O ’© ’©
© © ©
© © ©
©
CLEAR
Q
Press the programme number
buttons to enter the PlusCode
number.
If you make a mistake, press
CLEAR and re-enter the eorreet
number.
C O D E 1 2 3 4 -
C O D E : 0 - 9
S E T : O K
INPUT SELECT
o
CLEAR
Q
Press OK.
The date, start and stop times,
programme position, tape speed and
PDC setting appear on the TV
sereen.
• If“—” appears in the “PR”
(programme) eolumn (this may
happen for loeal broadeasts), you
have to set the appropriate
programme position manually.
Press Mm to seleet the desired programme position.
• To reeord from other equipment eonneeted to one or more of the
LINE inputs, press INPUT SELECT to display the eonneeted line
in the “PR” position.
You will only have to do this operation onee for the referred
ehannel. The VCR will then store your setting.
If the information is ineorreet, press CLEAR to eaneel the setting.
If you want to ehange the date, tape
speed and the PDC setting:
1 Press
you want to ehange.
2 Press M / m to reset it.
• To reeord the same programme
every day or the same day every
week, see “Daily/weekly
reeording” on page 47.
• To use the PDC funetion, set V/P to ON. For details about the
PDC funetion, see “Timer reeording with PDC signals” on
o
Press MENU to exit the menu.
46 Recording TV programmes using the VÌDEO Pius+® system
E X I T