Hookups, Front speakers, Rear and center speakers – Sony STR-V200 User Manual
Page 6: Video component hookups, Overview, What cords will i need, Active woofer, V* if your tv has separate speakers, Tv or direct broadcasting satellite (dbs) tuner, Tv or dbs tuner
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Hookups
Front speakers
Front speaker
Receiver
Front speaker
(L)
SPEAK RS
JEW jCENTBi
Note
If you use front speakers with low maximum power input,
adjust the volume carefully to avoid excessive output on the
speakers.
Rear and center speakers
Rear speaker
(R)
Rear speaker
Receiver Center speaker (L)
Video Component Hookups
Overview
This sectiort describes how to connect video
components to the receiver.
TV/DBS VIDEO
What cords will I need?
Audio cords (not supplied) (1 for a TV or DBS tuner; 2
for a VCR)
White (L)
Red(R)
White (L)
Red (R)
Note
Be sure to connect the both rear speakers (L and R). No
sound is output from the rear speakers if only one rear
speaker is connected. _
Active woofer
Receiver
Active woofer
MIX
-
(
r|#
V* If your TV has separate speakers
You can connect one of the speakers to the SPEAKERS
CENTER terminals for use with Dolby Pro Logic
Surround sound (see page 15).
Hookups
The arrow ■=^ indicates signal flow.
TV or Direct Broadcasting Satellite (DBS) tuner
TV or DBS tuner
Receiver
VCR
XflFUr
VCR
OUTPUT
MPUT
Receiver
WOEO
V«EO
VIDEO
) — [
AUDIO
AUDIO