Audio recording – Sony STR-AV770X User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Audio Recording
Recording on an Audio Tape Deck or DAT Deck
Tape Dubbing
1
Select the desired program source with the
FUNCTION selector.
For an FM/AM broadcast, tune in the desired station
2
Set the tape (DAT) deck in the recording mode.
3 Start the selected program source.
1,4
1
Insert the recorded tape into tape deck 1 (or the
DAT deck).
2
Insert a blank tape into tape deck 2 and adjust the
recording level.
3
Press TAPE 1 or DAT to select the deck for
playback.
4
Start the playback of the tape (or the
DAT)
in tape
deck 1 (or the
DAT
deck), and set tape deck 2 in the
recording mode.
Dubbing will start.
To record the SURROUND, DBFS and TONE control
settings
If you have connected graphic equalizers or other effectors
to the ADAPTOR input, you can record the settings through
the equalizer.
Connection;
STR-AV770X
Graphic
equalizer etc.
DAT or
Tape deck
Note:
If you disconnect one of these, no sound will be heard from
the receiver.
20
Note on tape dubbing
Tape dubbing is possible only in the following directions:
From
(playback side)
To
(Recording side)
FUNCTION
selector to be
pressed
Tape deck
connected to TAPE
1 IN
Tape deck
connected to TAPE
2 OUT
TAPE 1
DAT deck
connected to DAT
OUT
DAT deck
connected to DAT
IN
Tape deck connect
to TAPE 1 or 2 OUT
DAT