Sony STR-DE725 - Manual (Page 42)

Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 20 -
20,000 Hz; rated 100 watts
per channel minimum RMS
power, with no more than
0.09% total harmonic
distortion from 250
milliwatts to rated output.
Amplifier section
POWER OUTPUT
Stereo mode (8 ohms 20 Hz - 20 kHz.
THD 0.09%)
100 W+ 100 W
Surround mode
(8 ohms at 1 kHz. THD
0 . 8 %)
Front: 100 W/.ch
Center^*: lOOW
Rear^*: lOOW/ch
a) Depending on the sound held settings and
the source, there may be no sound output.
Dynamic power output
155 W + 155 W. 8 ohms
220 W + 220 W. 4 ohms
Harmonic distortion at rated output
Less than 0.09% (with
sound field, tone,
and bass booster
bypassed)
Frequency response
PHONO: RIAA
equalization curve
±0.5 dB
CD, TAPE/MD, DVD/
LD. TV/DBS.
VIDEO 1.2:
10 Hz - 50 kHz
+0.5/-2 dB (with
sound field, tone,
and bass booster
bypassed)
Inputs (Analog)
PHONO:
Sensitivity: 2.5 mV
Impedance:
50 kilohms
S/N‘’>: 75 dB (A.
2.5 mV"')
CD. DVD/LD. TAPE/
MD. TV/DBS.
VIDEO 1.2:
Sensitivity: 150 mV
Impedance:
50 kilohms
S/N»*': 82 dB (A.
150 mV">)
b) 78 ' I M F
c) Weighted network, input level
Inputs (Digital)
DVD/LD:
Sensitivity: ~
Impedance: -
S/N: 100 dB (A,
20 kHz LPF)
Outputs TAPE/MD. (REC OUT):
VIDEO 1.2 (AUDIO
OUT):
Voltage: 150 mV.
Impedance:
10 kilohms
WOOFER:
Voltage: 2 V
Impedance:
1 kilohms
PHONES:
Accepts low- and
high-impedance
headphones
BASS BOOST +6 dB at 70 Hz
Sampling Frequency
48 kHz
EQ BASS:
100 Hz-l.OkHz
(21 steps)
MID:
500 Hz~5.0kHz
(21 steps)
TREBLE:
1.0 kHz~10kHz
(21 steps)
Gain levels:
+10 dB, 1 dB step
t :«K'
I
a
S'
5
‘
3
fi)
o
“I
3
u
r*
S'
3
43