Speaker impedance, Note, Multi-channel surround setup – Sony STR-DE725 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Speaker impedance

To enjoy multi channel surround, connect front, center,
and rear speakers with a nominal impedance of 8 ohms or

. higher, and set the speaker IMPEDANCE SELECTOR to

"8ii.” Check the instruction manual supplied witlfyour

speakers if you're not sure of their impedance. (This
information is usually printed, on a label on the back of
the speaker.)

You may connect a pair of speakers with a nominal
impedance between 4 and 8 ohms to the FRONT
SPEAKERS terminals, if you set the IMPEDANCE
SELECTOR to “4D" but you will not be able to enjoy
multi-channel surround sound.

Note

Be sure to connect front speakers with a nominal imptedance of 8

ohms or higher if you want to select both sets (A+B) of front
speakers (see page 21).

Multi-Channel Surround
Setup

For the best possible surround sound all speakers should
be the same distance from the listening position (O)-

(However, this unit lets you to place the center speaker up

to 5 feet (1.5 meters) closer (©) and the rear speakers up
to 15 feet (4.5 meters) closer (©) to the listening position.
The front speakers can be placed from 3 to 40 feet (1.0 to

12.0 meters) from the listening position (O)-)

Do not place the center or rear speakers farther away from the
listening position than the front speakers.

■0

•s

(/)