To change the data service for all stations, Changing the default data service, Setting the baud rate – Sony SAT-B1 User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing the Default

Data Service

Selecting CANCEL returns you to the

previous screen, without saving your
selections.

Select one of the following:

To Do This...

Do This...

Change the data service for the
current station only

Select the data service and then
select OK.

Change the data service for all
stations

Select DEFAULT (then see
"Changing the Default Data
Service" below).

Change the baud rate for the DSS
receiver's high-speed data port

Select BAUD RATE (then see
"Setting the Baud Rate" below).

Call your program provider if you have questions about selecting a
data service.

To change the data service for all stations:

Select DEFAULT from the Data Services screen.

Select a default data service and then select OK.

DEFAULT DATA SERVICE

DATAI

✓

DATA 2

DATA3

DATA 4

DATAS

DATA 6

DATA?

DATAS

CANCEL

HELP

Call your program provider if you have questions about default data
services.

Setting the Baud Rate

Selecting CANCEL returns you to the

previous screen, without saving your

To set the baud rate for the DSS receiver's high-speed data port:

Select BAUD RATE from the Data Services screen.

Select a baud rate for the high-speed data port and then select OK.

SET BAUD RATE

2400

4800

9600

19200

CANCEL

HELP

Call your program provider if you have questions about setting the

baud rate.

Chapter 4: Using the System Features 43