Sony MZ-R30 User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Error message

Meaning/Remedy

NO SIGNAL

• The recorder could not detect digital input signals.

♦ Make sure that the source is connected firmly (page 11).

•If the error message appears while recording, press ■ to stop

recording.

PB ONLY

• You tried to record or edit on a premastered MD (PB means

playback.)
<¥■ Insert a recordable MD.

PROTECTED

• You tried to record or edit on a MD with the tab in the record-

protect position.
•¥■ Slide the tab back (page 27).

SORRY

• You tried to erase a track mark while playing the MD or at the

beginning of the first track.

• You tried to erase a track mark to combine tracks the recorder

cannot combine, (caused by system limitation)

TEMP OVER

• Heat has built up in the recorder.

♦ Let the recorder cool down.

TRFULL

• There is no more space for new dafa when you are editing the

MD.
♦ Erase unnecessary tracks (page 20).

TrPROTECT

• You tried to record or edit on a track that is protected from

erasing.
♦ Record or edit on other tracks.