Sony MZ-R30 - Manual (Page 20)

t^catung recoraea iracKS
^ ou can y<>ur rivi'rdinj;s bv .ukiinj;/
orasinj; track marks or Ubolinj; tracks aiui
MDs. Premasterod MDs cannot K' t\iitod
Notes on editing
• ex'» not move or k'j; tbc recorder while "T^ k
Edit" is tlashing in the display.
•^\нl cannot edit tracks on an MD that is
record-protected. Before etliting tracks,
close the tab on the side of the MD.
Erasing tracks
To erase a track
Note that once a recording has been
erased, you cannot retrieve it. Check the
track number before erasing.
To erase the whole disc
^ ou c.in quickly er.iso .ill the tracks and
data of the MD at the same time.
Note that once a recording has been
er.ised, you cannot retrieve it. Be sure to
check the contents of the disc vou want to
ERASE
ERASE
Press ERASE while playing the track
you want to erase.
"Erase OK?" and "Push Erase"
appear in the display alternately, and
the recorder plays the selected track
repeatedly. To cancel erasing, press
t In stop mode, keep pressing ERASE
and slide REC to the right.
"All Erase?" and "Push Erase" appear
in the display alternately. To cancel
erasing, press ■.
2
Press ERASE again.
"Toe Edit" flashes in the display.
When erasing finishes, "BLANK
DISC" appears.
^ Check the track number in the
display and press ERASE again.
The track is erased from the MD and
the remaining tracks are renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.
20