Sony KV-36XBR200 - Manual (Page 30)

Using the SET UP 0 Menu
SET UP
► CHANNEL SET UP
FAVORITE CHANNEL
VIDEO LABEL
LANGUAGE ENGLISH
TILT CORRECTION. 0
OMENU
Ea
Move 04 Select Q
For detailed information on using the remote
control to modify menu settings, refer fo
"Learning Menu Selection" on page 21.
To select the SET UP
If any menu items are "grayed out", press the
ANT button on your remote control so that a
channel number appears.
Notes
• Your remote control can be programmed to
operate your cable box, (see page 33)
• After setting CABLE, you will need to run
AUTO PROGRAM.
• ON/OFF TIMER and CHANNEL BLOCK
settings will be erased when CHANNEL
FIX is set.
26
CHANNEL
SET UP
'HANNFt ;
»CABLE ON
CHANNEL FIX OFF
AUTO PROGRAM
CHANNEL SKIP ADO
CHANNEL CAPTION
CMfcNLI
With the CHANNEL SET UP menu open:
1 Use the joystick to select the feature you want to change.
2 Press to access the feature.
CABLE:
Select ON if your TV is connected to a cable system.
(Easy Setup Guide will set CABLE to OFF automatically if a
cable channel is not available)
CHANNEL FIX:
Press up or down on the joystick to set the TV's input to one of the
following options:
2-6: When the cable box is connected to the VHF/UHF input and you do not want to switct
to AUX mode. Press DBS/CABLE (FUNCTION) and then CH +/- to change channels.
AUX
2-6: When a cable box is connected to AUX and a cable or antenna is connecter
to VHF/UHF. You can alternate between the two inputs by pressing ANT.
VIDEO 1:
When you have connected video equipment (e.g. A/V receiver) and you
want the TV input fixed to it. You will be able to alternate between video sources.
OFF:
When you want to switch CHANNEL FIX off.
If the TV is in the AUX mode when you turn CHANNEL FIX off, press ANT to return to
regular (CATV) mode.
TIMER and CHANNEL BLOCK settings are erased when CHANNEL EIX is set.
AUTO PROGRAM:
Allows the TV to program all receivable channels.
CHANNEL SKIP/ADD:
With the CHANNEL SKIP/ADD window open:
1 Press d'' to SKIP or ADD (only one option will be available).
2 Select the desired channel.
CHANNEL SKIP ADO
n
► ADO
-TMENU
tc select ine channel
MoveO: Seiner Q E>i_gT
CHANNEL CAPTION:
Label up to 12 channels, with up to four letters each. With the
CHANNEL CAPTION window open:
1 Press 0 and then press up or down on the joystick to select
the desired channel, and press 0 again.
2 Press up or down on the joystick to display the first letter or
number of the caption and press 0 to select it.
3 Press 0 .
To erase a Caption, press RESET.
C hannel
.TWENU