Sony SLV-998HF - Manual (Page 12)

step 3: Hookups (continued)
Hookup 1: VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set
the switch to either channel.
For details, see page 87.
If you made A/V
connections (from page 9),
you can skip this step.
2
Turn on your cable box.
3
Press EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press OK, For details, see page 32.
© The CLOCK SET menu appears. Select AUTO
and press OK. For details, see page 33.
© The SMART CH MAPPING menu appears.
Press CURSOR to enter the ZIP/
POSTAL CODE in your area and press OK, (You
can also use the number buttons to enter the
ZIP/POSTAL CODE.)
O The CABLE BOX menu appears. Select ON. For
details, see page 39.
© Enter your cable box code number and press
CURSOR ♦ . For details, see page 40.
6NQL1SH
ESPAÑOL
FRANÇAIS
Use |4^ to select
Then push |OK|
Push lEASY SET to quit
ÍAUTO: IMANUALI
Use |4--»| to select
Then push fot^
Push lEASY SET UPl to quit
ZIP / POSTAL CODE
Enter your ZlP/POSTAL
CODE us ( ng [^. or ftT]
and I»»! key s.
then push lOKI
BOX CODE NO.
BOX OUTPUT CH
Use to select
Push lEASY SET UP| to quit
CABLE BOX CONTROL
CABLE MOUSE S»r iK>FF I
BOX OUTPUT CH
3-
Enter your CABLE BOX
Code No. us i ng j0-9| keys
Refer to the Operating
Manual for the Code
12 Getting Started