Sony SLV-688HF - Manual (Page 11)

Hookup 1: VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set
the switch to either
channel.
2
3
For details, see page 69. If
you made A/V connections
(from page 8), you can skip
this step.
Turn on your cable box.
Press EASY SET UP on the VCR.
O The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press OK. For details, see page 28.
© The CLOCK SET menu appears. Set the clock
and press OK. For details, see page 29.
0 The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 31.
O Enter your cable box code number and press 4’-
For details, see page 32.
SET UP
LANGUAGE
► ENGLISH
ESPAÑOL
FRANÇAIS
NEXT
CANCEL
EASY SET UP
SET UP
CLOCK SET
> ‘ »
^1 /1 998
NEXT OK
CANCEL ; EASY SET UP
SET UP
CABLE BOX CONTROL
► CABLE MOUSE
•ON OFF
BOX CODE NO. —
BOX OUTPUT CH 0H3
SELECT ◄/►
CANCEL : EASY SET UP
SET UP
CABLE BOX CONTROL
CABLE MOUSE
► BOX CODE NO. ----------- ------ --
BOX OUTPUT CH
ENTER YOUR CABLE BOX
CODE NO. USING 0-9 KEYS
REFER TO THE OPERATING
MANUAL FOR THE CODE
© Select your cable box
output channel and
press OK.
SET UP
CABLE BOX CONTROL
CABLE MOUSE *0N OFF
BOX CODE NO
► BOX OUTPUT CH -*CH3**
USE TO SELECT CABLE
80XCH THEN PUSH OK
SET UP
SET UP IS DONE
Normal display
continued
Getting Started 11