Citizen Systems Citizen CL-S700 - Manual (Page 34)

2
Printer Operation
34
Mode Settings
6. Save the changed value permanently.
Unless you perform the following save operation, the new setting
value will be lost when you turn off the printer.
To Save Changes
1 Press the 2 key twice to display the
message “Save Settings No-Discard”.
2 Press the 5 key or the ∞ key to display
the message “Save Settings Yes-Save”.
3 Press the 3 key.
The new settings will be saved into the
printer ROM and the printer will return
to the “On Line Ready” screen.
7 Changing the Interface or Emulation Setting
The printer must be rebooted when changing the top menu
“Interfaces” or sub-menu “Emulation Select” settings. Reboot the
system according to the following procedures.
• The screen shown on the right will be
displayed when “Save Settings Yes-
Save” is selected.
• Press the
5 key or the ∞ key to display
the message “Reboot System Yes”.
• Press the
3 key and reboot the printer.
To Discard Changes
1 Press the 2 key twice to display the
message “Save Settings No-Discard”.
2 Press the 3 key.
The printer will return to the “On Line
Ready” screen.
The new settings will be lost when the
printer is turned off.
Save Settings
Yes-Save
Exit Enter
Save Settings
No-Discard
Exit Enter
On Line
Ready
Reboot System
No
Exit Enter
Reboot System
Yes
Exit Enter
Save Settings
No-Discard
Exit Enter
On Line
Ready
On Line
Ready