Sony KV-27XBR25 - Manual (Page 13)

Connecting Other Equipment
After making these connections, you will be abie to do ftie following:
• View the playback of video tapes
• Record TV programs • Record one TV program while viewing another program
• If you have model KV-27XBR25 or KV-32XBR25, these connections allow you to watch two TV programs at once,
using a window picture.
Connecting a VCR, video disc player or Camcorder equipped with an S video output jack
(Rear of TV)
Signal flow VIDEO
INI
VIDEO
IN 2
VIDEO
IN3
wm^m m
© © ©
©
© ©
lOOP
our
MOMTQR
OUI
AUDIO
UNE
OUT
vAa
AUDIO
OUT
©
©
©
©
§
9
CONVERTER
VH (UHF
to S video input
toVHF/UHF
yur;';
?
s;
Preparing for use Operating the equipment
1 Turn on the TV.
2 SetS-VIDEOto“ON"(p.44).
3 Press TV/VIDEO on the TV or on the Remote
Commander so that "VIDE01” appears on the screen.
To return to TV mode
Press TV/VIDEO on the TV or on the Remote Commander
so that a channel number appears on the screen.
To operate the video equipment, refer to the instoiction
manual that comes with the equipment.
You can operate a Sony VCR or video disc player, or
a non-Sony VCR with the supplied Remote Commander.
For details, see “Using the Pre-Programmed Remote
Commander" (pp. 62 - 68).
About S video input
Video input and output signals can be separated into Y
(luminance or brightness) and C (chroma or color) signals.
Usually these two signals are combined in a VCR and sent
as one signal to a TV. Separation of the Y and C signals
prevents them from interfering with one another, thereby
improving picture (especially color) quality.
This TV is equipped with S video input jacks through which
these separated signals can be input directly.
Chapter 1; Setting Up 13