Sony STR-D315 - Manual (Page 8)

Listening toAA/atching a program source
Selecting a Program Source Selecting the Speaker System
POWER -» ON
c
1 u.
o o
. CZ=3._^
o I
1 1 rr . L
o o o
Turntable
CD player
Tape deck or
MD player
TV/LD player
Select the progam source.
If only pressing one of the FUNCTION buttons
on the supplied remote commander, both the
power of its operating equipment and the
receiver are turned on.
Start the selected program.
To listen to or watch Press
Phono record PHONO
Radio Broadcast TUNER
Compact disc CD
MD or Taped
programs TAPE1/MD,TAPE2
MONITOR
TV, LD or Video
programs TV/LD
To drive speaker system A: Press SPEAKERS A.
To drive speaker system B: Press SPEAKERS B.
To drive both speaker systems A and B: Press both
SPEAKERS A and B.
For headphones listening; Connect headphones to
HEADPHONES and set SPEAKERS A and B to off.
IMPORTANT
Speaker systems A and B are connected in series. No sound
can be heard if the SPEAKERS A and B buttons are set to on
when only one speaker system is connected.
Adjusting the Audio
Adjusting volume
Turn VOLUME.
Reducing the sound to a iow levei temporarily
(- 20 dB attenuation)
Press MUTING and the indicator lights up.
Press again to restore the same listening level as before and
the indicator goes off.
Adjusting Tone Quaiity
Adjust BASS or TREBLE for the optimum sound.
Adjusting Left and Right Sound Balance
Adjust BALANCE to correct stereo imaging, when the
speaker position is not symmetrical.
Reinforcing the Bass
Press LOW BOOST and the indicator lights up.
Press again to cancel the LOW BOOST effect and the
indicator goes off.
8