1 keep pressing cd, Press 2, Note – Sony STR-D315 User Manual
Page 13: Changing the settings of the function buttons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For tape deck/DAT/MD player
To
Press
Designate numbers
Nuiqeric buttons
Designate number more than 10
>10 '
(For tape deck and MD player)
1
Fastfurward
Rewind
◄◄
Pause play
II I
Start play
► :
Start reverse play (For tape deck)
Select the tape running direction
(For tape deck having RMS
RMS; DIRECTION
function)
!
Stop play
■
Clear the RMS program contents
(For tape deck having RMS
function)
RMS CLEAR
Start recording (Forward direction)
Start recording (Reverse direction
for tape deck)
Program selections (For tape deck
having RMS function)
RMS/START
For TV/VTR/LD player
Changing
the
Settings
of
the
FUNCTION
Buttons
You can replace the functions stored in the FUNCTION
buttons.
To change the settings of the SYSTEM CONTROU
FUNCTION buttons
While pressing one of the FUNCTION button to be changed,
press 1 to 0 button to select the desired function.
After changing the setting of the FUNCTION button, the
equipment can be operated with the FUNCTION button you
have changed.
To return the function to the initial mode, perform the same
operation above.
With the numeric buttons from 1 to 0, each function can be
selected as described in the following table:
To
Press
Designate channel numbers of TV/
VTR or selections of LD player
Numeric buttons
ETcsignate selections of LD player
more than 10
>10
Select the output signal from the
antenna terminal on the VTR: a TV
signal or VTR program (For VTR)
ANTTTV/VTR
Fast forward (For VTR and LD
player)
Rewind (For VTR and LD player)
◄◄
Pause play (For VTR and LD
player)
II
Start play (For VTR and LD player)
►
Stop play (For VTR and LD player)
■ '
Start recording (For VTR)
Enter selected TV/VTR channel
ENTER
Numeric buttons
The function to be seiected
1
CD player
2
DAT deck
3
MD player
4
DECK A
5
DECKB
6
LD player
7
VTR 1 (Remote control mode)
8
VTR 2 (Remote control mode)
9
VTR 3 (Remote control mode)
0
TV
Example: To change the CD FUNCTION button to the DAT
function button.
1
Keep pressing
CD
2-Press 2
Note
The settings of the TUNER button and the PHONO button
can not be changed.
13