When using overlap or slide, Overlap, Slide – Sony DCR-VX700 User Manual
Page 25: Slide 4, To cancel the fade-in/fade-out function, To use the fading function repeatedly, Notes on the fading, overlap and sliding function, O< o g c < o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When Using Overlap or Slide
(1) Set DIGITAL MOOT to OVLRLAIL
(2) Press FADiiK/OVliRLAP repeatedly until the desired effect indicator appears in the viewfinder.
(3) Press START/STOP to start recording.
With the OVERLAP effect, the scene being shot gradually fades in over the still picture of the last
recorded scene. With the SLIDE effect, the scene being shot gradually appears while the still picture of
the last recorded scene is sliding out.
OVERLAP
SLIDE
SLIDE 4
\»l H Í/
:
fader
C
^»ii 1
u
\H M U/
ÍOVERLAPC
‘^ILLLLil-
\ t l M
R
j
EIU
c
.
u
ÍSLIDE
X
í
:
^ni I n\
u
o
<
o G c <
o
1
^
<
To cancel the fade-in/fade-out function
Before pressing START/STOP, press FADER/OVERLAP until the fade indicator disappears.
To use the fading function repeatedly
Start from step 1 each time.
Notes on the fading, overlap and sliding function
• You cannot fade in, fade out, or use the overlap/slide function while you record with interval recording,
cut recording or photo recoring.
• When you set the camcorder to standby mode from a mode other than recording and select OVERLAP or
SLIDE, the camcorder starts Rec Rc^’iew automatically to store the last scene on the tape.
25