Sony DCR-VX700 - Manual (Page 22)

Changing the Mode Settings
Setting the Mode of Each Item
Select RETURN to return to main menu (item select).
Items in CAMERA and VTR Modes
COMMANDER
• Normally select VTR4.
• Select OFF when not using the Remote Commander.
• Select
ID when using the Remote Commander with the ID number set.
• Select ID SET to register the ID number so that the camcorder responds only to the supplied Remote
Commander, and not to other Remote Commanders. To set the ID, see page 68.
HEADPHONE
• Normally select LOW.
• Select MID to slightly raise the volume of the headphones.
• Select HIGH to raise the volume of the headphones.
BEEP
• Normally select ON.
• Select OFF to turn the beep sound off.
EVF MODE
• Select this item and change the level of the indicator by pressing f or + to adjust the color intensity
and brightness of the picture in the viewfinder.
CLOCK SET
• Select this item to reset the date or time. See page 48.
Items in CAMERA Mode only
REC LAMP
• Select ON to turn on the recording lamp on the front panel during recording.
• Select OFF otherwise.
D ZOOM
• Select ON to activate digital zooming. The zooming ability becomes 20x.
• Select OFF otherwise. The zooming ability becomes lOx.
FRAME REC
• Normally select OFF.
• Select ON for cut recording {p. 30).
When you remove the power source, the setting becomes OFF.
22
INT REC
• When you make interval recording , select SET and then select ON (p. 29). Otherwise, select OFF.
• Select INTERVAL to set or change the waiting time for interval recording.
• Select REC TIME to set or change the recording time for interval recording.
When you remove the power source, the setting becomes OFF, but the waiting time and recording time
are retained.
ft'
i:
I