I getting started, Charging and installing the battery pack, Charging the battery pack – Sony CCD-TR66 User Manual
Page 6: Charging time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Getting Started |
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To
charge the battery pack, use the supplied AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(
1
)
Connect the AC power adaptor to the wall outlet.
(2)
Align the right side of the battery pack with the line on the AC power adaptor, then
slide the battery pack in the direction of the arrow.
(3)
Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging
begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the
wall outlet, and then remove the battery pack and install it on the camcorder.
Charging Time
Battery pack
Charging time*
NP-33 (supplied)
60
NP-98/98D
215
NP-80/80D
190
NP-78
170
NP-68
125
NP-C65
105
NP-60D
90
* Approximate minutes to charge an empty pack using the supplied AC power adaptor
(Lower temperatures require a longer charging time.)
Battery Life
Battery pack
Typical recording time*
Continuous recording time**
NP-33 (supplied)
45
85
NP-98/98D
170
300
NP-80/80D
140
250
NP-78
130
230
NP-68
95
170
NP-C65
80
150
NP-60D
70
125
Approximate minutes when recording while you repeat recording start/stop,
zooming and turning the power on/off. The actual battery life may be shorter.
Approximate continuous recording time indoors.'