I advanced operations, Using alternative power sources, Note on power sources – Sony CCD-TR66 User Manual
Page 19: Using the house current
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I
Advanced Operations
Using Alternative Power Sources
You can choose any of the following power sources for your camcorder: battery pack,
the house current, alkaline battery, and 12/24 V car battery. Choose the appropriate
power source depending on where you want to use your camcorder.
Place
Power source
Accessory to be used
Indoors
House current
Supplied AC power adaptor
Outdoor
Battery pack
Battery pack NP-33 (supplied), NP-98/98D,
NP-80/80D, NP-78, NP-68, NPC65*, NP-60D
Size AA (LR 6) Alkaline
battery
Battery case (supplied)
In the car
12V or 24 V car battery
Sony DC pack DCP-77
* NP-C65 battery pack is not sold in Canada.
Note on power sources
Disconnecting the power source or removing the battery pack during recording or
playback may damage the inserted tape. If this happens, restore the power supply again
immediately.
,||||^
This mark indicates that this product is a genuine accessory for Sony
^ video product.
4^ When purchasing Sony video products, Sony recommends that you
purchase accessories with this "GENUINE VIDEO ACCESSORIES"
mark.
>
Q.
o
T3
Using the House Current
To use the supplied AC power adaptor:
(
1
)
Connect the AC power cord to a wall outlet. Insert the top of the connecting plate of
the AC power adaptor into the top of the battery mounting surface. Push the
connecting plate so that it attaches firmly. Make sure that you hear clicks twice.
(2)
Set the selector to VTR (DC OUT).
T9